Model Number	PHB-150
Brand Name	Shenyang Tianxing Testing Instruments Co., Ltd

Portable Brinell Hardness Tester Model PHB-150 is designed on basis of the basic theory of Brinell Hardness Testing. The testing load is accurately controlled by shear pin. The indentation diameter is read by reading microscope after the indentation is indented on test specimens. Brinell testing result can be obtained through checking appendix.

Brinell Hardness Tester Model PHB-150 has three applications: Bench Stand Tester, Portable Tester and Hammer Impact Tester. It can be used to test the hardness of middle and small parts as well as large and very large parts. It is especially suitable for testing the hardness of work pieces that are assembled and can not be cut into pieces or moved. The force can be applied from any direction, and the hardness on top, bottom and side etc could be all tested.

Test head can be used independently as Hammer Impact Type Brinell Hardness Tester by which we can test the hardness of workpeice from one side. The accuracy is much higher than other Hammer Impact Type Brinell Hardness Tester.

Test Conditions: 1580kgf, Ф7.26mm ball, F/D2 =30, which equivalent with test conditions: 3000kgf, Ф10mm ball.

SPECIFICATION:

Test force: 1580kg;

Tolerance of test force: ＜1%;

Indenter: φ7.26mm steel ball indenter (testing range: 100-400HB);

(Optional) Φ4.0mm carbide ball indenter (testing range: 400-650HB)

Opening size (W×D):150mmx100mm

Net weight: Bench type: 5.1Kg; Portable type: 4.2Kg; Hammer impact type: 0.8kg

STANDARD PACKAGE:

1 Tester                                1 V anvil

1 φ7.26mm steel ball indenter             1 pin removal tool

1 Brinell standard testing block            1 bag of shear pins (250pcs)

1 indenter sleeve                        1 20x readout microscope

1 support handle                        1 rubber protecting cap

1 Flat anvil                             1 carrying case

OPTIONAL ACCESSORIES:

Bench stand                            Dome anvil

Steel indenter                           Shear pins (bag of 250pcs)

Carbide indenter                        40x readout microscope

Brinell standard block                    3 lb hammer

Test head